Services directory
Automotive software engineering services
Explore focused support for vehicle diagnostics, networks, measurement analysis, testing, and the engineering tools that connect those workflows
Vehicle Diagnostics
Independent engineering support for vehicle and ECU diagnostics: UDS and OBD-II communication, ISO-TP and DoIP transport, DTC and DID handling, diagnostic sessions, and diagnostic applications.
Diagnostic Application Development
Build focused ECU diagnostic applications with Python or Qt, UDS communication, ODX data handling, and clear results for engineering teams.
Diagnostic Session Development
Implement UDS diagnostic session transitions, keep-alive behavior, response handling, and recovery from project-specific ECU requirements.
Diagnostic Session Testing
Test ECU diagnostic sessions and UDS response flows using defined inputs, repeatable automation, and focused engineering analysis.
DID Decoding Service
Decode UDS DID response bytes using ODX or PDX definitions, with checks for data layout, conversions, ECU variants, and interpretation limits.
DID Development
Develop UDS Data Identifier handling with aligned data definitions, access conditions, diagnostic application logic, and repeatable ECU checks.
DID Testing
DID testing for ECU diagnostics, covering UDS reads, negative responses, transport paths, automated checks, and engineering findings.
DoIP Integration
Integrate UDS diagnostics over DoIP with discovery, routing activation, connection recovery, and separate transport and diagnostic response handling.
DoIP Testing
DoIP testing for connection failures, UDS request issues, and ECU response problems using packet analysis and repeatable diagnostic tests.
DTC Decoding Service
Decode ECU DTC records and status information using diagnostic definitions, with raw evidence, operating context, and clear interpretation limits.
ISO-TP Integration
Integrate ISO-TP transport for UDS over CAN, with addressing, flow-control configuration, timeout handling, and repeatable communication checks.
ISO-TP Testing
Test ISO-TP communication over CAN, investigate diagnostic transport failures, and receive repeatable findings, applications, or automated tests.
ODX Analysis Service
Analyze ODX and PDX diagnostic definitions to resolve ECU variant selection, parameter interpretation, and data paths for diagnostic applications.
ODX Review
Review ODX and PDX diagnostic data for consistency, traceability, and practical use in ECU diagnostic applications.
UDS Diagnostic Development
UDS diagnostic development for ECU communication, ODX or PDX data use, CANoe automation, and evidence-based troubleshooting.
UDS Testing
Independent UDS testing for ECU diagnostics, negative responses, DTC behavior, transport issues, and repeatable CANoe-based test automation.
Vehicle Networks
Independent engineering support for in-vehicle communication: CAN and CAN-FD analysis and integration, DBC and signal decoding, bus errors, gateway behavior, LIN, J1939, and Automotive Ethernet.
Automotive Ethernet Analysis Service
Analyze Automotive Ethernet PCAP files for communication sequences, discovery failures, and timing issues with findings tied to capture evidence.
Automotive Ethernet Integration
Integrate Automotive Ethernet endpoints and software interfaces with scoped configuration changes, communication checks, and packet evidence.
Automotive Ethernet Testing
Automotive Ethernet testing for DoIP, SOME/IP, UDS, and PCAP traffic, with focused analysis of connection failures and network timing issues.
CAN Integration
CAN integration support for gateway issues, missing messages, ISO-TP failures, and unknown signals using recordings, DBC data, and focused analysis.
CAN Log Analysis
Analyze CAN, CAN-FD, BLF, ASC, and DBC data to investigate communication issues, signal behavior, intermittent events, and vehicle-network problems.
CAN Restbus Simulation
Build CAN restbus simulations to reproduce missing network participants, investigate communication failures, and analyze vehicle-network behavior.
CAN Signal Decoding
Decode CAN signals with DBC definitions, check byte order and scaling, and receive engineering values with traceable interpretation notes.
CAN Testing
Test CAN message presence, timing, signal values, and gateway routing against requirements, with repeatable checks and recorded evidence.
CAN-FD Analysis Service
CAN-FD analysis for missing messages, bus errors, decoding issues, and gateway behavior using recordings, CAN dumps, and DBC data.
CAN-FD Integration
Integrate CAN FD communication with controller configuration checks, DBC alignment, gateway mappings, and verification of agreed network changes.
CAN-FD Testing
CAN-FD acceptance testing with defined scenarios, timing tolerances, captured evidence, and repeatable pass/fail results for engineering regression checks.
DBC Analysis Service
DBC analysis for decoding CAN traffic, investigating signal and message mismatches, and producing usable databases, findings, and repeatable converters.
DBC Conversion
Convert CAN database definitions with checks for identifiers, bit layout, scaling, and multiplexing. Document target-format limits and verify decoded values.
Vehicle Data & Measurement Analysis
Turn large vehicle measurements and bus recordings into engineering findings: event detection, signal correlation, batch analysis across many files, format conversion, and automated analysis pipelines.
Automated Vehicle Measurement Analysis
Find recurring events across MF4/MDF recordings with automated signal checks, explicit time alignment, and traceable engineering reports.
BLF Analysis
Investigate intermittent vehicle faults in BLF logs with event timelines, message timing comparisons, decoded signals, and documented evidence.
BLF Conversion
Convert supported BLF records to ASC or CSV with checks for timestamps, channels, identifiers, and payloads. Document format limits and verify target-tool import.
BLF Decoding Service
Decode BLF recordings into usable CAN data, investigate vehicle behavior, and automate repeatable analysis from supplied logs and DBC files.
MF4 Automation
Automate recurring MF4 measurement batches with configurable event rules, per-file processing status, repeatable reports, and explicit handling of failed inputs.
MF4 Conversion
Convert MF4 measurement data into practical engineering workflows, with automated processing, signal analysis, and repeatable reporting.
MF4 Measurement Analysis
Analyze MF4 measurement data to locate events, correlate signals, investigate vehicle behavior, and automate repeatable engineering reports.
Python Automation
Automate automotive data preparation and recurring engineering workflows in Python with input validation, reusable configuration, and clear outputs.
Testing & Validation
Automate ECU and vehicle testing: CANoe and CAPL test benches, restbus simulation, diagnostic test automation, regression suites, and automated test reporting built around your existing setup.
CANoe Configuration
Configure CANoe projects, CAPL automation, and restbus simulations for repeatable CAN and CAN-FD testing, timing analysis, and validation.
CANoe Restbus Simulation
Build CANoe restbus simulations with CAPL nodes, defined message behavior, and clear simulation boundaries for testing available components.
CANoe Test Automation
Automate CANoe testing with CAPL, repeatable simulations, and executable validation workflows for CAN and CAN-FD networks.
CAPL Automation
Automate CANoe test procedures with CAPL setup, stimulus, bounded waits, assertions, and cleanup for repeatable engineering test results.
CAPL Development
CAPL development for CANoe and CANalyzer projects, including automated tests, restbus simulation, and repeatable vehicle-network validation.
Automotive Engineering Tools
Custom software for automotive engineering workflows: diagnostic applications, CAN viewers and analysis tools, measurement viewers, data converters, engineering dashboards, and Python automation.
Automotive Python Development
Automotive Python development for CAN analysis, data conversion, engineering dashboards, and focused diagnostic applications.
REST API Development
Develop REST APIs for automotive engineering tools with defined endpoints, validated inputs, clear errors, and documented integration contracts.
REST API Integration
REST API integration for automotive engineering tools, connecting telemetry and internal workflows to focused dashboards and dependable automation.
REST API Testing
Test engineering REST APIs for contract compliance, invalid inputs, response data, and state changes with repeatable cases and recorded evidence.